Introduction Welding torchesTIG accessoriesCollet holderCollet holder 1.6 47mm /TE0001-16/10N31/701.0191-ZVAR/ TIG/17/18/26 standard

Collet holder 1.6 47mm /TE0001-16/10N31/701.0191-ZVAR/ TIG/17/18/26 standard

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.

+421 948 488 885 eshop@valtec.sk

Collet holder 1.6 47mm /TE0001-16/10N31/701.0191-ZVAR/ TIG/17/18/26 standard

Name: Collet holder 1.6 47mm /TE0001-16/10N31/701.0191-ZVAR/ TIG/17/18/26 standard
Brand: Ostatní
SKU: 701.0191-ZVAR
Price: 0.9 EUR
Availability: InStock

SKU:701.0191-ZVAR

Manufacturer:Ostatní

Electrode holder for TIG torches 17/18/26 with diameter 1,6 mm and length 47 mm.

Delivery time:

Availability

In Stock: 213

Availability: Stock

Price: 0,73 € without TAX
0,90 € incl. tax

Add to the Wishlist

Legal guarantee 2 years (EU notice) Show information

Description Parameters

Description

Plate holder (plate house) - if the holder contains a strainer, it is called a gas lens. The key is inserted into the key holder. The clamp holder must be selected according to the size of the burner. The 9/20 collet holder is compatible for small TIG9 and TIG20 torches, while the 17/18/26 holder is for large TIG17/18/26 torches.

The pincer holder has four holes on the sides through which the welding gas flows. Depending on whether the gas is further directed by a screen or not, there are two types of holders:

· collet holder with a screen, called a gas lens - the screen evenly distributes the gas and helps to achieve higher quality welds (same principle as with a screen on a tap). Without a screen, the water swirls a little, with a screen it flows gently, dispersed - the same applies to a collet holder with a screen and welding gas.

· standard collet holder - gas flows directly through the holes and creates slight turbulence.

Parameters

Compatible burners::TIG 17/18/26

Diameter::1.6mm

Length::47 mm