Categories
 
 
Introduction Welding torchesTIG accessoriesCollet holderCollet holder 4.0 47mm /TE0001-40/ TIG/17/18/26
 
 
 

Collet holder 4.0 47mm /TE0001-40/ TIG/17/18/26

Collet holder 4.0 47mm /TE0001-40/ TIG/17/18/26
View Full-Size Image
Collet holder 4.0 47mm /TE0001-40/ TIG/17/18/26
 
Man

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.
+421 948 488 885

Collet holder 4.0 47mm /TE0001-40/ TIG/17/18/26

SKU:TE0001-40
Manufacturer:Ostatní
Electrode holder for TIG torches 17/18/26 with diameter 4,0 mm and length 47 mm.
:
Availability
In Stock: 10
Availability: Stock
Price: 1,54 € without TAX
1,89 € incl. tax
 ks
Add to the Wishlist
Legal guarantee 2 years (EU notice) Show information
Plate holder (plate house) - if the holder contains a strainer, it is called a gas lens. The key is inserted into the key holder. The clamp holder must be selected according to the size of the burner. For small TIG9 and TIG20 torches the 9/20 holder is compatible, for large TIG17/18/26 torches the 17/18/26 holder is compatible.The pincer holder has four holes on the sides through which the welding gas flows. Depending on whether the gas is directed further by a strainer or not, there are two types of holders: · collet holder with strainer, so-called gas lens - the strainer evenly sprays the gas and helps to achieve higher quality welds (same principle as with a tap strainer). Without a strainer, the water swirls a little, with the strainer it flows gently, diffused - the same applies to the collet holder with strainer and welding gas. · standard collet holder - gas flows directly through the holes and creates slight turbulence.
Parameters
Compatible burners::TIG 17/18/26
Diameter::4mm
Length::47 mm
Man

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.
+421 948 488 885
 
Recommended products