Plasma EX-TRAFIRE 75 SD (EX-4-010-041) with 8m torch (400V)

All of our sources have an integrated GRID mode, which is an automatic switch between pilot and main arc. Thus, there is no need to re-ignite by pressing the switch on the burner when exiting the material. The operator of the plasma source or assembly can adjust the cutting parameters as required or as required by the application using simple controls. Using the patented Thermacut Torch Connection System (TCS), the plasma assembly can be quickly and easily completed and prepared for use. EX-TRAFIRE® power supplies have a range of safety features. Among the most important is the start of the auto-check after system boot. Another important safety feature is the so-called "Cap sensor", which is the guarding of a properly tightened cap on the burner. If the cap is not tightened or is completely missing on the torch, the system will not allow the plasma arc to be ignited for the protection of the operator. Another important safety feature is the protection against ignition of the plasma arc by inadvertently pressing the switch on the torch (or burning machine) when the plasma source is switched on. The advantage of the sources is their low weight compared to the competition. MORE INFORMATION IN THE ATTACHMENTS FOR DOWNLOAD