Orbital pipe saw AXXAIR CC122 / 122FS29 Ø 5–119 mm

AXXAIR CC122 / 122FS29 orbital pipe saw Ø 5–119 mm

The offered second-hand unit is equipped with an AXXAIR FS29 electric motor with a power output of 1,200 W and a 230 V power supply. Electronic speed control with torque compensation allows the cutting speed to be adapted to the material and pipe diameter.

The concentric clamping system fixes the pipe uniformly without undesirable deformation. The saw is suitable for professional use in piping, mechanical engineering, and the food, pharmaceutical, chemical, and energy industries, where precise and repeatable pipe preparation is required.

Condition: used / second-hand product. The device shows normal signs of use corresponding to its previous operation. The visual condition of the specific unit corresponds to the product photographs.

Technical parameters

• Manufacturer: AXXAIR
• Machine type: 122
• Model series: CC122
• Design: orbital pipe saw
• Motor: AXXAIR FS29
• Drive type: electric
• Motor power: 1,200 W
• Power supply: 230 V / 50–60 Hz
• Rated motor current: 5.5 A
• Motor protection: IP20
• Speed control: electronic with torque compensation
• Speed: approximately 95–280 rpm
• Number of control stages: 6
• Maximum pipe range: Ø 5–119 mm
• Range with standard jaws: Ø 29–119 mm
• Range with auxiliary jaws: Ø 5–99 mm
• Max. wall thickness when cutting: up to approximately 5 mm, depending on the pipe material
• Cut squareness accuracy: < 0.25 mm
• Distance of the cutting disc from the jaws: 2–16 mm
• Machine weight: approx. 44 kg
• Dimensions: approx. 443 × 541 × 304 mm
• Year of manufacture of this unit: 03/2023

Working range

AXXAIR CC122 allows for the machining of pipes in the range:

• Ø 29–119 mm with standard clamping jaws
• Ø 5–99 mm with auxiliary jaws

The total working range of the machine is therefore Ø 5–119 mm.

Precise orbital cutting

During orbital cutting, the cutting disc moves around a firmly clamped pipe. This principle provides several significant advantages over classic manual cutting:

• high cut squareness
• minimal pipe deformation
• precise and repeatable part lengths
• high-quality cutting edge
• easier subsequent preparation for welding
• reduced need for additional machining

The manufacturer specifies a cut squareness accuracy of under 0.25 mm.

Clamping system

The machine uses a concentric pipe clamping system, which ensures even centring and stable gripping of the material during cutting.

System advantages:

• precise pipe centring
• clamping without material deformation
• stability throughout the entire cut
• simple and fast setup
• high repeatability of results

AXXAIR FS29 electric motor

The specific unit offered is equipped with a motor:

• Type: FS29
• Power supply: 230 V
• Frequency: 50–60 Hz
• Power: 1 200 W
• Current: 5,5 A
• Protection: IP20
• Control: electronic
• Speed range: approx. 95–280 rpm

Electronic speed control allows you to select the appropriate cutting speed based on the type and thickness of the material being processed.

Pipe cutting

According to the manufacturer, the CC122 can cut walls with a thickness of up to approximately 5 mm, while the maximum usable thickness depends on the type of material, pipe diameter, cutting disc used, and set cutting conditions.

The machine is particularly suitable for pipes made of:

• stainless steel
• carbon steel
• duplex steels
• titanium
• aluminium
• other metallic materials depending on the cutting disc used

Main advantages

• working range Ø 5–119 mm
• professional orbital pipe cutting
• cut squareness accuracy < 0,25 mm
• minimal pipe deformation
• high repeatability of cuts
• motor FS29 / 1 200 W / 230 V
• electronic speed control
• concentric material clamping
• wall cutting capacity up to approximately 5 mm
• robust professional design
• suitable for both workshop and installation use
• option to convert the AXXAIR platform for other orbital operations
• Made in France

Application

AXXAIR CC122 is particularly suitable for:

• precise pipe cutting before welding
• production of piping systems
• orbital TIG workstations
• food industry
• pharmaceutical industry
• chemical and petrochemical industry
• energy sector
• production of technological equipment
• mechanical engineering
• production of stainless steel pipes
• service and assembly work

Thanks to the precise square cut, the device is especially suitable where orbital TIG welding follows and precise fit of pipe ends is required.