Welding table GPPH PRO 1200x1000mm 16-DIAG-feet

The welding table must be flat! PRO table tops with a thickness of 15 mm have dense ribbing, which ensures a perfectly flat work surface. A table with dimensions of 1200×1000 mm has 2 longitudinal ribs and 2 transverse ribs. The massive and rigid substructure of the table top guarantees the highest stability during use and protection against deformation. The flatness tolerance of the table on the entire board is ±0.3 mm*.

Milled and countersunk holes in the table top allow easy assembly and disassembly of tools during work thanks to the precise alignment of the holes with the tools. This also contributes to their lower wear and tear - you don't need a lot of force to assemble and disassemble them. This design is the best available solution on the welding table market! The manufacturing tolerance of the welding table holes is ±0.05 mm.

The engraved scale on the table top consists of vertical and horizontal lines in a 100x100 mm grid. It serves as a reference point when placing structures and during the assembly of tools. Using measuring tools, you can adjust your construction to achieve the desired dimension.

The legs in PRO welding tables made of 100×100 mm profile have a load capacity of 700 kg/leg. In the case of the 3000×1480 mm size, which has 8 legs, you will reach a maximum load capacity of 6,000 kg.

You can choose: a leg with a foot or on a wheel – choose what suits you best!

For working on PRO series welding tables, you can use PRO milled tools. Thanks to them, you can precisely produce every flat 2D and spatial 3D construction. And all this in a significantly shorter time!

* provided that the table is properly aligned.