Categories
 
 
Introduction Welding torchesTIG welding torchesTIG water-cooled welding torchesTIG torch LORCH i-LTW 3000 PM-KD 4m /513.3004.6/ for cold wire
 
 
 

TIG torch LORCH i-LTW 3000 PM-KD 4m /513.3004.6/ for cold wire

TIG torch LORCH i-LTW 3000 PM-KD 4m /513.3004.6/ for cold wire
View Full-Size Image
Man

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.
+421 948 488 885

TIG torch LORCH i-LTW 3000 PM-KD 4m /513.3004.6/ for cold wire

SKU:513.3004.6
Manufacturer:LORCH
Welding torch LORCH i-LTW 3000-PM-KD liquid-cooled for TIG welding at max. current 230 A AC/320 A DC, load at 100% duty cycle. It has integrated cold wire routing. The welding wire is added automatically so that the torch can be guided with both hands. The i-LTW 3000-PM-KD burner is equipped with the "Powermaster" control concept. The i-LTW 3000-PM-KD can be used with an electrode diameter of 1.0 - 3.2 mm. Burner length 8m.
:
Availability
This product is currently not available.
Availability: To order
Price: 1 241,00 € without TAX
1 526,43 € incl. tax
 ks
Add to the Wishlist
Legal guarantee 2 years (EU notice) Show information
Features of the i-LTW 3000-PM-KD torch
  • Powermaster control - with the Lorch Powermaster remote control, you can regulate all the important parameters directly on the control panel on the torch. You can handle complex welding tasks where different types of welds need to be made repeatedly. You can easily recall the required working values from the Tiptronic job memory on the torch (up to 100 working settings)
  • possibility of rotating the digits on the display by 180° for left-handed welding
  • HeatProtect protective function - increases the service life and protection of the electronics using a thermal sensor with a thermal fuse function
  • TorchProtect protection function - automatic detection of the i-LTW 3000-PM-KD torch and limitation of the max. current of the source, which prevents overloading of the torch
  • 5-PIN Tuchel control connector
  • ergonomic handle size 1 - oval handle with optimised centre of gravity sits perfectly in the hand. Thanks to the contoured sides of the handle, the torch does not slip
  • flexibility - maximum mobility in the workplace is ensured by the ball joint on the handle and the flexible cable harness with leather cover
  • fixed plugs - to prevent loss of plugs on water-cooled torches, the plugs are attached directly to the hoses
  • stability - thanks to the shortened working distance of the torch, the centre of gravity of the torch is optimised, which enables stable handling and arc guidance
  • Safety - thanks to the raised second current button, unwanted activation of the buttons is prevented
Parameters
Cooling type:Gas
Hose length:4 meters
Electrode diameter:1.0 - 3.2mm
Loader:100% at 320 A DC / 230 A AC/DC
Burner type:SR 17 / 18 / 26
Man

Do you need advice?

If you have not found the answer to any of your questions, please contact us directly.
+421 948 488 885
 
Recommended products