MIG wire ELBOR SG2 1.2/16kg G3Si1 (2SPF12KG16)

MIG wire ELBOR SG2 1.2 mm / 16 kg / G3Si1 / D300 (2SPF12KG16)

ELBOR SG2 MIG wire is a high-quality copper-coated solid welding wire designed for MAG welding of non-alloy and low-alloy structural steels. It corresponds to the classification EN ISO 14341-A: G 42 4 M21 3Si1 / G 38 2 C1 3Si1 and AWS A5.18: ER70S-6. The manganese and silicon content ensures good deoxidation properties, welding arc stability and the required mechanical properties of the weld metal.

The wire is characterised by a stable welding arc, low spatter formation and a uniform weld bead appearance. The copper-coated surface supports reliable electrical contact with the welding tip and smooth feeding through the welding torch. It is used with shielding gas C1 (100% CO2) or M21 (Ar/CO2 mixture). It is suitable for welding in all common welding positions for manual, mechanised and automated MAG welding.

ELBOR SG2 is suitable for welding structural steels S235, S275, S355 and other compatible carbon steels, including ASTM A516 Grade 60. It is used in the production of steel structures, beams, frames, pipes, tanks, machine parts and transport equipment. The 1.2 mm diameter provides a higher deposition rate and is suitable for the productive welding of medium and heavy-thickness steel parts. The wire is supplied in 16 kg packaging on a D300 spool for professional and industrial use.

Main advantages:

• Copper-coated solid welding wire ELBOR SG2
• Classification SG2 / G3Si1 / ER70S-6
• Designed for MAG welding of non-alloy and low-alloy steels
• Stable welding arc and low spatter formation
• Uniform weld bead appearance
• Copper-coated surface supporting electrical contact and smooth feeding
• Good deoxidation properties thanks to the manganese and silicon content
• Good strength and toughness of the weld metal
• Compatible with protective gases M21 (Ar/CO2) and C1 (CO2)
• Suitable for welding in all common welding positions
• Suitable for structural steels S235, S275 and S355
• Used in the production of steel structures, frames and tanks
• Diameter 1.2 mm for productive welding of thicker parts
• Welding current range 120–280 A according to the manufacturer
• Industrial packaging 16 kg on a D300 spool

Classification:

Chemical composition:

Typical chemical composition according to the ELBOR SG2 technical data sheet. Values do not represent a chemical analysis of a specific production batch.

Mechanical properties:

Mechanical properties of the all-weld metal according to the ELBOR SG2 technical data sheet for shielding gases M21 and C1. Values do not represent the test results of a specific delivered batch.