MIG WELD SG3 Wire 1.0mm /15kg JQ MG50-6A GOLDEN BRIDGE (G4Si1) BS300

MIG WELD SG3 Wire 1.0 mm / 15 kg JQ MG50-6A GOLDEN BRIDGE (G4Si1) BS300

MIG WELD SG3 JQ MG50-6A wire from GOLDEN BRIDGE is a copper-coated solid welding wire designed for MAG welding of non-alloy and low-alloy structural steels. It corresponds to classification SG3 / G4Si1 / ER70S-6. Thanks to its increased manganese and silicon content, it provides excellent deoxidation properties, a stable welding arc, and high-quality weld metal with good strength and toughness.

The wire is characterised by low spatter formation, good feeding properties, and a uniform weld bead appearance. According to the manufacturer, it exhibits good tolerance to mill scale and slight surface contamination of the base material, as well as low sensitivity to porosity. The copper-coated surface ensures reliable electrical contact and smooth wire feeding. Shielding gas CO2 (C1) or an Ar/CO2 mixture (M21) is used for welding.

The wire is suitable for welding structural, fine-grained and selected low-alloy steels with a strength class of approximately 500 MPa. It is used in the production of steel structures, bridges, frames, machine components, transport equipment, trailers, tanks and industrial equipment. The 1.0 mm diameter provides a good compromise between deposition rate and weld pool control when welding thinner and medium-thick steel parts. The 15 kg BS300 spool is intended for regular use in metalworking, locksmith workshops and industrial operations.

Main advantages:

• Copper-coated solid welding wire GOLDEN BRIDGE JQ MG50-6A
• Classification SG3 / G4Si1 / ER70S-6
• Suitable for MAG welding of non-alloy and low-alloy steels
• Higher manganese and silicon content for good deoxidation properties
• Stable welding arc and low spatter formation
• Good feeding characteristics and a uniform weld appearance
• Copper-coated surface for reliable electrical contact
• Low sensitivity to porosity under correct welding conditions
• Good strength and toughness of the weld metal
• Suitable for welding in all common welding positions
• Option to use shielding gases C1 (CO2) and M21 (Ar/CO2)
• Suitable for steel structures, bridges, frames and mechanical engineering
• Diameter 1.0 mm for universal use in metalworking
• Industrial packaging 15 kg on a BS300 spool

Classification:

Chemical composition:

Example chemical composition of JQ MG50-6A wire according to the manufacturer GOLDEN BRIDGE. Values do not represent an analysis of a specific production batch.

Mechanical properties:

Example test results of all-weld metal according to GOLDEN BRIDGE for shielding gases C1 and M21. The test temperature for impact energy KV2 is not explicitly stated on the product page. Values may vary depending on the welding conditions.