MIG WELD SG3 ECO Wire 1.0mm /15kg JQ MG50-6AN GOLDEN BRIDGE (G4Si1) BS300, Uncoated

MIG WELD SG3 ECO Wire 1.0 mm / 15 kg JQ MG50-6AN GOLDEN BRIDGE (G4Si1) BS300 – uncoppered

The MIG WELD SG3 ECO JQ MG50-6AN wire from GOLDEN BRIDGE is an uncoppered solid welding wire designed for MAG welding of non-alloy and low-alloy structural steels. It corresponds to classification SG3 / G4Si1 / ER70S-6. Thanks to its higher manganese and silicon content, it provides excellent deoxidation properties, a stable welding arc, and high-quality weld metal with good strength and toughness.

The characteristic feature of the JQ MG50-6AN version is a surface without an additional copper layer. The wire is characterised by smooth feeding, low spatter formation, and a uniform appearance of the weld bead. According to the manufacturer, it exhibits good tolerance to mill scale and slight surface contamination of the base material, as well as low sensitivity to porosity. It is suitable for welding in all common welding positions using CO2 (C1) shielding gas or an Ar/CO2 mixture (M21).

The wire is suitable for welding structural, fine-grained and selected low-alloy steels with a strength class of approximately 500 MPa. It is used in the production of steel structures, bridges, frames, machine components, transport equipment, trailers, tanks and industrial equipment. The 1.0 mm diameter provides a good compromise between deposition rate and weld pool control. The 15 kg BS300 spool is designed for regular use in metal fabrication, locksmith workshops, and industrial operations.

Main advantages:

• Solid uncoppered welding wire GOLDEN BRIDGE JQ MG50-6AN
• Classification SG3 / G4Si1 / ER70S-6
• Designed for MAG welding of non-alloy and low-alloy steels
• Surface without an additional copper layer
• Higher manganese and silicon content for good deoxidation properties
• Stable welding arc and low spatter formation
• Good feeding characteristics and a uniform weld appearance
• Low sensitivity to porosity under correct welding conditions
• Good strength and toughness of the weld metal
• Suitable for welding in all common welding positions
• Option to use shielding gases C1 (CO2) and M21 (Ar/CO2)
• Suitable for steel structures, frames, and mechanical engineering
• Diameter 1.0 mm for universal welding of steel parts
• Industrial packaging 15 kg on a BS300 spool

Classification:

Chemical composition:

Example chemical composition of the JQ MG50-6AN welding wire according to the manufacturer GOLDEN BRIDGE. Values do not represent an analysis of a specific production batch.

Mechanical properties:

Example test results of all-weld metal according to GOLDEN BRIDGE for shielding gases C1 and M21. Testing temperatures are -40 °C for C1 and -50 °C for M21. The values stated are not the results of a test from a specific delivered batch.